| Sightglasses, Gaskets & Sight
Glass Cleaning |
Toughened & annealed sightglasses for circular
sightports and rectangular sightglass fittings including Borosilicate
and Sodalime glass toughened to DIN 8902, DIN 7080, DIN 8903, DIN
7081 and BS 3463. We also offer a range of accessories including sightglass
wipers & sight window spray devices
for maintaining visibility. Plus lamps, timers and
other accessories for our Lumiglas light fittings.
See Glass Safety guidelines for
advice on how to install & maintain glass for plant safety
|
| Circular Toughened Glass
Discs |
- Soda Lime Glass Discs to DIN8902 for temperatures to 150°C
or to BS3463 for temperatures up to 300°C
- Borosilicate glass to DIN7080 for temperatures to 280°C
or to BS3463 for temperatures up to 360°C
- Also Quartz glass for temperatures up to 900°C
- Glass discs with central wiper hole
available in Sodalime, Borosilicate and other materials on request.
- Metaglas® safety fused sight glasses
for ultimate safety and long life.
- Special materials and dimensions available
|
 |
| Glass Plates for Rectangular & D-Ended
Sightglasses |
- Soda lime glass to DIN8903 for temperatures up to 150°C
- Borosilicate glass to DIN7081 for temperatures to 243°C
|
 |
| Safety Sightglasses |
- To ensure ultimate safety for plant and personnel choose METAGLAS® Safety
Sightglasses. METAGLAS® sight windows have unmatched
strength and integrity and these incredibly durable products
far exceed the pressure and impact resistance of conventionally
toughened glass.
- Try METAGLAS® in a new application or replace existing toughened
sightglasses to improve in-plant safety. We offer a wide range
of standard sizes and can supply non-standard sizes to suit your
requirements.
|
 |
| Gaskets |
- Standard and special seals for sight flow indicators circular
and rectangular sightports in a wide range of materials including
Non Asbestos Fibre, PTFE, Food Quality Silicon, Neoprene, Viton,
EPDM and more. FDA approved available
|
Accessories
Glass Wiper Type 1 |
- Simple effective assembly for wiping clean circular sightglasses
- Maximum pressure 6 bar
- Combine with sight/light fittings
- Also available for METAGLAS®
Glass
Wiper Type 1 pdf
|
 |
| Glass Wiper Type II |
- Pressure rating same as whole fitting
- Side mounted handle for minimal interference with viewing area
Glass
Wiper Type II pdf
|
 |
| Spray Device for sightglass
assemblies |
- Use to jet spray water, inert gas or other fluid to maintain
glass visibility
- No interference with viewing area
|
 |
| Spray Ring |
- Provides 360 degree sight glass cleaning to remove solids & liquids & maintain
clear visibility
- Insert between the connection flange and sight glass.
- No interference with viewing area
- The spray ring is fed by a 1/4" threaded inlet & distributes
the cleaning gas or liquid radially through a series of spray
holes along the inside circumference of the ring
- Standard sizes from 2" to 8", specials available
on request
- For operating pressures up to 20 Bar
|
 |
| Integral Time Delay Switch |
- Integrally fitted timer
- Allows local or remote switching
- Light fitting is automatically switched off after a programmed
time delay of approximately 5 minutes
- For Ex and safe area light fittings
Integral
Time Delay Switch pdf
|
 |
| EEX Time Delay switch with push button switch |
- Installed in line between supply and light fitting.
- Safe area models also available on request
Back to Products Page
|
 |
The products featured here are just a small
selection from our extensive range.
Please use the contact page
to request more information, or to discuss a specific application. |
