| Tank Inspection Luminaires |
Lumiglas industrial light fittings
for tank, reactor & vessel illumination and inspection. Including
LED lights for long life, miniature stainless steel lights for
sanitary applications, the classic Lumistar for combined sight
and light and powerful models such as the USL 06 and USL 07 to
illuminate large vessels and reactors
See Hazardous Area Equipment for
Ex Light fittings conforming to ATEX
|
| LED Tank Inspection Lights |
- Fit & Forget - Maintenance free operation
- Resistant to vibration and physical shock
- Bright but cool light – avoids heating product
- Stainless Steel housing
- Dust & water jet tight to IP65
- Mountings to suit your application
- 240V Supply & Push Button Operation
LED Tank Inspection Lights pdf
|
 |
| Lumiglas Lumistar |
- The classic 'half moon' version for the combined light and
sightglass
- Suits circular sightglass fittings style DIN28120 or similar
- Nominal dia: DN 50 to DN 200
- Operating Voltage: 24V or 120V AC or DC
- Power, depending on size: Halogen filament lamp 20W, 50W or
100W
- Standard product with momentary push button
- Light fitting is attached to the sightport cover flange by
two or four screws.
Lumiglas
Lumistar pdf
|
 |
| Miniature Stainless Steel
Light fitting USL01 |
- Fully sealed miniature sightglass light fitting
- Smooth stainless steel housing with diameter of only 24mm
- Excellent for combining sight and light without increasing
sightport size
- Operating Voltage/Power: 24V AC/DC
- Halogen filament lamp up to 20W
- With or without momentary push button
- Clip directly to wiper, secure to flange with bracket or mount
directly to NA-Connect or Tri-clamp fittings
Miniature
Stainless Steel Light fitting USL01 pdf
|
 |
| Compact Stainless Steel Light
fitting USL13 |
- Fully sealed compact light fitting for sightglasses and visual
flow indicators
- Smooth stainless steel housing with diameter of only 53mm
- For sight ports fittings from DN25
- Operating Voltages of 12, 24 or 120V AC or DC
- Halogen filament lamp output of 20W or 50W
- With or without momentary push button
- Secure to flange with bracket or upstand or mount directly
to NA-Connect or Tri-clamp fittings
Compact
Stainless Steel Light fitting USL13 pdf
|
 |
| Stainless Steel Light fitting
USL15 |
- Compact powerful light fitting
- Smooth stainless steel housing
- For sightglasses fittings from DN40
- Wide range of operating Voltages of 12, 24, 120 or 230V AC
or DC
- Halogen filament lamp output from 5W to 100W
- With or without momentary push button
- Secure to flange with bracket or upstand or mount directly
to NA-Connect or Tri-clamp fittings
Stainless
Steel Light fitting USL15 pdf
|
 |
| Light fittings USL06 & USL07 |
- Powerful lights for maximum illumination
- Fully sealed sightglass light fitting
- Diecast aluminium housing
- For sightglasses fittings from DN50
- Wide range of operating Voltages of 12, 24, 120 or 230V AC
or DC
- Halogen filament lamp output from 20W to 100W
- Secure to flange with bracket or upstand
- Special version available for high temperature applications
- Special version available for constant (24hr) use applications
- Available with integral timer switch
- Anti-dazzle shield available
Light
fittings USL06
pdf
Light
fittings USL07 pdf
Back to Products Page
|
 |
The products featured here
are just a small selection from our extensive range.
Please use the contact page
to request more information, or to discuss a specific application. |
